Point to multipoint with AP 1230AG

Unanswered Question

Hello,

I want to do this configuration:

Site A must be connected to site B and to site C. On the site A there is an AP 1230AG, it's configured in bridge mode in point to multipoint to site B and C in 802.11A.

On the site B there is an AP 1230AG, it's configured in bridge mode in point to point to the site A in 802.11A, and it's configured in access point in 802.11G for laptops.

On the site C there is an AP 1230AG, it's configured in bridge mode in point to point to the site A in 802.11A, and it's configured in access point in 802.11G for laptops.

I believe that it's possible to make bridge and access point on the same AP in point to point , but is it possible in point to multipoint with AP 1230AG?

Thanks and regards.

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
pradeepde Wed, 05/30/2007 - 06:04

As long as there are dual radios each radio can be configured as both as access point and brdige mode.

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode