I have 6 sites that connect up to an MPLS network and two of those sites have a 500Meg TLS ethernet connection between them. I am trying to get all the routing between all the sites to be dynamic for redundancy and failover. All the sites that connect up to the MPLS network are using BGP and the sites that have the 500Meg TLS circuit is BGP to talk to the MPLS cloud and static routes to talk across the TLS circuit between the two sites. I would like to implement EIGRP across the TLS circuit and get dynamic routing going to all our sites that way if the TLS circuit fails each site act independantly of on another. I am including drawings of each scenario.