simple question about power supply

Answered Question
May 24th, 2007

Hi to all,

Can i use a 5509's power supply for a 5513's power supply?

thanks.

I have this problem too.
0 votes
Correct Answer by Amit Singh about 9 years 8 months ago

Hello,

The power supplies from the C5513 and C5509 chassis are not interchangable. The C5513 takes power supply WS-C5508, while the C5509 takes power supply WS-C5518.

C5509

Power Requirements

Input current:

12.0A max. @ 100VAC 60Hz

6.0A max. @ 200VAC 50Hz

KVA rating: 1.3 KVA

Output power: 805 watts per supply AC or DC

Heat Dissipation: 1150 watts (3920 BTUs per hour)

Data Sheet

Catalyst 5509 Switching System

http://www.cisco.com/warp/partner/synchronicd/cc/pd/si/casi/ca5000/prodlit/5509_ds.htm

C5500

Power Requirements (one power supply)

8.0A @ 230 VAC 50 Hz

16A @ 115 VAC 60 Hz

KVA rating: 1.84 KVA

Power consumption: 1100W

Data Sheet

Catalyst 5500 Switching System

http://www.cisco.com/warp/partner/synchronicd/cc/pd/si/casi/ca5000/prodlit/c5500_ds.htm

HTH,Please rate if it does.

-amit singh

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Amit Singh Thu, 05/24/2007 - 02:50

Hello,

The power supplies from the C5513 and C5509 chassis are not interchangable. The C5513 takes power supply WS-C5508, while the C5509 takes power supply WS-C5518.

C5509

Power Requirements

Input current:

12.0A max. @ 100VAC 60Hz

6.0A max. @ 200VAC 50Hz

KVA rating: 1.3 KVA

Output power: 805 watts per supply AC or DC

Heat Dissipation: 1150 watts (3920 BTUs per hour)

Data Sheet

Catalyst 5509 Switching System

http://www.cisco.com/warp/partner/synchronicd/cc/pd/si/casi/ca5000/prodlit/5509_ds.htm

C5500

Power Requirements (one power supply)

8.0A @ 230 VAC 50 Hz

16A @ 115 VAC 60 Hz

KVA rating: 1.84 KVA

Power consumption: 1100W

Data Sheet

Catalyst 5500 Switching System

http://www.cisco.com/warp/partner/synchronicd/cc/pd/si/casi/ca5000/prodlit/c5500_ds.htm

HTH,Please rate if it does.

-amit singh

Actions

This Discussion