Amit Singh Thu, 05/24/2007 - 06:03
User Badges:
  • Cisco Employee,

Dan,


Switch# erase nvram:

reload


-amit singh


mohammedmahmoud Thu, 05/24/2007 - 06:09
User Badges:
  • Green, 3000 points or more

Hi,


You can use "write erase".



HTH ,please do rate all helpful replies,

Mohammed Mahmoud.

ankbhasi Thu, 05/24/2007 - 06:14
User Badges:
  • Cisco Employee,

Hi Dan,


If you just want to delete startup config issue


delete nvram:startup-config


if you want to delete all the files in nvram then you can go with any commands already mentioned by other experts.


HTH


Ankur


*Pls rate all helpfull post

chris.lepa Thu, 05/24/2007 - 06:19
User Badges:

yeah, on most devices you can either do:


erase nvram

or

erase startup-config

MUHAMMAD SHAHEEN Thu, 05/24/2007 - 08:05
User Badges:
  • Silver, 250 points or more

Hi,


just to add what everyone has said....


if this switch has been part of VTP domain then it will also VLAN.DAT file in the flash:


you should also delete that file (delet flash:vlan.dat)


HTH

Shaheen

Actions

This Discussion