Ho wto clear configuration

dan_track · ‎05-24-2007

Hi

Quick question, how do I clear the startup configuration?

Thanks

Dan

Amit Singh · ‎05-24-2007

Dan,

Switch# erase nvram:

reload

-amit singh

mohammedmahmoud · ‎05-24-2007

Hi,

You can use "write erase".

HTH ,please do rate all helpful replies,

Mohammed Mahmoud.

ankbhasi · ‎05-24-2007

Hi Dan,

If you just want to delete startup config issue

delete nvram:startup-config

if you want to delete all the files in nvram then you can go with any commands already mentioned by other experts.

HTH

Ankur

*Pls rate all helpfull post

chris.lepa · ‎05-24-2007

yeah, on most devices you can either do:

erase nvram

or

erase startup-config

MUHAMMAD SHAHEEN · ‎05-24-2007

Hi,

just to add what everyone has said....

if this switch has been part of VTP domain then it will also VLAN.DAT file in the flash:

you should also delete that file (delet flash:vlan.dat)

HTH

Shaheen