SDM on catalyst 2950

Unanswered Question
May 24th, 2007

Why informations about Switch Health and Port Utilization on dashboard in SDM software doens't appear ?

info >>

swtich : catalyst 2950

ios image : c2950-i6q4l2-mz.121-22.EA9.bin

Att

Antonio

Attachment: 
I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
carenas123 Thu, 05/31/2007 - 07:06

Cisco Router and Security Device Manager (SDM) is a tool that can be used to proactively manage Cisco IOS software-based router resources and security before they affect mission-critical applications on the network. Security Manager provides the ability to start SDM without the need for SDM to be installed on your router.

Antonio Brandao Thu, 05/31/2007 - 07:32

Thanks Carenas, for your reply,

Correcting....

the correct software is the cisco device manager for switches and don't SDM how i had mentioned..

...so why the dash board information doesn't appears ?

What can be my problem ?

At

Antonio

Zeek Ferraros Sun, 02/08/2009 - 16:18

I have the same problem.

Did you figure it out?

Please let me know if you have a solution.

Thank,

Zeek

Leo Laohoo Mon, 02/09/2009 - 13:39

2950 and SDM???? 2950 can't accomodate the SDM software. Are you talking about the Cisco Device Manager?

Zeek Ferraros Mon, 02/09/2009 - 14:35

3650... non of the switches with the web interface shows traffic on the ports.

I've tested in 10 of them.

Leo Laohoo Mon, 02/09/2009 - 15:13

Use 3rd party software, like Solarwinds. It's more accurate and you can create a report.

Leo Laohoo Mon, 02/09/2009 - 17:31

I used to use a software called CyberGauge (by Neon Software). The company was bought by SolarWinds in 2006.

Actions

This Discussion