05-24-2007 05:12 PM - edited 03-14-2019 09:42 PM
Hi there,
We have a problem with our phones in that when dialling an internal phone number using an STD code it will drop the last 2 digits and not dial the destination.
For example:
If you dial 65861234 the number will dial no problem but if you dial 0265861234 it will only dial 02658612 dropping off the last 2 digits.
External phone numbers seem to work no problem, it only seem to be doing this to registered numbers in the system.
Any assistance appreciated.
Dan
05-24-2007 06:46 PM
Seems that you may have some overlaps, perhaps a translation pattern that matches only 8 digits, such as XXXXXXXX. I suggest using Dialed Number Analyzer to analyze your dial plan.
Chris
05-24-2007 07:08 PM
Thanks,
Will check it out.
Dan
05-24-2007 07:44 PM
Thanks,
We have used the dial analyzer and it is telling us that the call should work, any other suggestions on what to look for?
Dan
06-05-2007 08:50 PM
Anyone have any other Ideas?
Thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide