deepakbihari Thu, 05/24/2007 - 22:01
User Badges:

Hi Satish,


Thanx for the link.

Actually i also want to understand basic difference between V.35 and V.11 interface.

Also what will be the interface on the router for v.11 output.


Regards

mohammedmahmoud Thu, 05/24/2007 - 22:27
User Badges:
  • Green, 3000 points or more

Hi,


V.11 is an ITU-T recommendation, first agreed in 1976, for balanced electrical circuits for data communication at up to 10 Mbit/s. Used with the 37-pin ISO 4902 connector, it is compatible with EIA RS-422. The 15-pin ISO 4903 connector is recommended for data network interface.


V.35 is an ITU-T standard located on layer 1 on the OSI model. Max speed is 2 Mbit/s. Withdrawn ITU-T recommendation for 48kbit/s data transmission over wideband circuits. The physical and electrical characteristics of this interface are now specified in ITU-T recommendation V.11.



Both are supported on Cisco routers as shown from the documents Satish has attached.



HTH, please do rate all helpful replies,

Mohammed Mahmoud.



Actions

This Discussion