Rob Huffman Fri, 05/25/2007 - 16:20
User Badges:
  • Super Red, 40000 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Mike,


Have you tried;


shut/no shut on the voice port and see that clears it.


or


The following example resets the Cisco IP phone with a phone-tag of 1:


Router(config)# ephone 1

Router(config-ephone)# reset


From this doc;


http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_command_reference_chapter09186a0080611360.html#wp1052803


Hope this helps!

Rob

m-ketchum Fri, 05/25/2007 - 16:45
User Badges:

Thanks Rob. A reset of the phone didn't clear the hung call leg.


I would like to try a shut/no shut on the voice port, but it would allow me to select any voice ports to shut.


Thanks again.


Mike

Actions

This Discussion