×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Catalyst 6506 fan-tray identification

Unanswered Question
May 28th, 2007
User Badges:

Working with CATOS on Catalyst6506, is there any way to identify between a fan-try WS-C6K-6SLOT-FAN and a WS-C6K-6SLOT-FAN2? there is?nt this code part number in the part.

Is there any catos command to identify the fan-try type?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
mohammedmahmoud Mon, 05/28/2007 - 03:18
User Badges:
  • Green, 3000 points or more

Hi,


Try "show environment all" or "show system".



HTH, please do rate all helpful replies,

Mohammed Mahmoud.

luis.gomez-bast... Tue, 05/29/2007 - 23:28
User Badges:

Hi Mohammed,

Thanks in advance for your help.

With the show environment all the info about fan installed is:


Fan? Model?????????????? Ver Cooling? Ambient FanStatus

???????????????????????????? capacity temp

---- ------------------- --- -------- ------- ---------

1??? WS-C6000-CL?????????? 1? 260 cfm??? -????? ok


For Cat6506 chassis I know only 2 fan-tray types WS-C6K-6SLOT-FAN and WS-C6K-6SLOT-FAN2.

What type WS-C6000-CL fan-tray is?


Luis



mohammedmahmoud Tue, 05/29/2007 - 23:56
User Badges:
  • Green, 3000 points or more

Hi,


You are very welcomed, try "show inventory":



Example:


Console> show inventory


NAME: "Chassis", DESCR: "Cisco Systems WS-C6509 9 slot switch"


NAME: "7", DESCR: "Network Analysis Module 2 port WS-X6380-NAM Rev. 0.201"


PID: WS-X6380-NAM , VID: , SN: JAB0343055Y



NAME: "8", DESCR: "1000BaseX Ethernet 8 port WS-X6408-GBIC Rev. 0.202"


PID: WS-X6408-GBIC , VID: , SN: SAD02430406



NAME: "PS 1", DESCR: "1300 watt supply AC"


PID: WS-CAC-1300W , VID: , SN: ACP03380477



NAME: "Fan 1", DESCR: "Fan 1"


PID: WS-C6K-9SLOT-FAN , VID: , SN:



Console>




HTH, please do rate all helpful replies,

Mohammed Mahmoud.

luis.gomez-bast... Wed, 05/30/2007 - 03:36
User Badges:

Hi Mohanmed,


The system is running Catos 8.1(3) and it has not the show inventory conmand.


Thanks in advance


Luis

mohammedmahmoud Wed, 05/30/2007 - 04:29
User Badges:
  • Green, 3000 points or more

Hi Luis,


I've been searching for a while for a solution for you, but i couldn't find one, "show inventory" was the best option but as you've said i've made sure that its not usable with your code.


I'll keep you updated if i found something new.


HTH,

Mohammed Mahmoud.

Actions

This Discussion