Call forwarding to Reception issue

Unanswered Question
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
vassatrian Mon, 05/28/2007 - 07:50
User Badges:

What type of call processing do you use?


Usually once call is forwarded then you will not be able to revert control back to original called party.

Based on information you have provided I would recommend to use UNITY voice-mail and write a script where user presses 0 for reception.



Rob Huffman Mon, 05/28/2007 - 07:51
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Douglas,

Have a look at the Forward No Answer setting on the Person B/Directory Number config.

Hope this helps!


It is set to Forward Busy & No Answer to Voicemail. Forward All is cleared.

We're using CCM4.0, and the problem seems to be global, all phones are affected.

When you call directly PersonB and he doesn't answer - the call is forwarded to VoiceMail Port.

If PersonA sets forwarding to PersonB, then you call PersonA and both do not answer, the call is forwarded to VoiceMail Pilot. In some cases the call is forwarded to reception...

vassatrian Mon, 05/28/2007 - 13:15
User Badges:

Another way of achieving it - hunt groups

You either deliver call to hunt group where users are hunt group members:

1. user A

2. user B

3. reception

or call forward to hunt group.




This Discussion