05-29-2007 09:32 AM - edited 03-05-2019 04:21 PM
Hi,
Does anyone knows the pin out assigment for creating a console cable using CAT5 RJ-45.
Is it the same as a Crossover?
Thanks
Jorge
05-29-2007 10:01 AM
Hi,
Here you are a simple link to show you how, its not a crossover:
http://www.kame.net/~suz/cisco-cable.html
http://www.cisco.com/warp/public/701/14.html
HTH, please do rate all helpful replies using the scroll box on the right,
Mohammed Mahmoud.
05-29-2007 10:03 AM
05-29-2007 10:03 AM
Hi Jorge,
I believe this link will help you with your requirement
http://www.delmar.edu/Courses/ITNW1325/cisco1labs.htm
You can have a look at the last pin out diagram which is for roll over cable.
HTH
Ankur
*Pls rate all helpfull post
05-29-2007 10:05 AM
No it is not the same as a crossover, a rollover cable would be laid out like this:
End 1
Orange/White, Orange, Green/White, Blue, Blue/White, Green, Brown/White, Brown
End 2 is the inverse of End 1
Brown, Brown/White, Green, Blue/White, Blue,
Green/White, Orange, Orange/White
So however you wire one end you just do the opposite on the other. Very Simple.
05-29-2007 10:17 AM
Thank you all for your reply and information.
Just made one and it worked ..
Rgds
Jorge
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide