Buy or Renew
Buy or Renew
Cisco + Splunk: It’s a new day for your data. Learn more.
 
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
373
Views
5
Helpful
1
Replies

Filter INbound OSPF Routes on Pix 7.2

Go to solution
jstarkey
Level 1
Level 1

‎05-29-2007 12:53 PM - edited ‎03-03-2019 05:12 PM

I have a Pix 515 running v7.2 and neighboring OSPF with an IOS Router.

I'd like to prevent the IOS router from injecting any more routes than intended by placing a "distribute list in" to filter IN bound routes on the Pix. (I don't have the ability to filter the outbound routes on the IOS router).

So on the Pix I don't see distribute-list as a valid OSPF command. Is there some other command or workaround that will provide the equivalent functionality?

TIA,

JPS

Labels:
0 Helpful
1 Accepted Solution

Accepted Solutions

Go to solution
kerek
Level 4
Level 4

‎05-30-2007 03:02 AM

Hi,

Try this:

area x filter-list prefix dummy in

prefix-list dummy permit 1.1.2.0/24

Hope it helps, rate if does

Krisztian

View solution in original post

1 Reply 1

Go to solution
kerek
Level 4
Level 4

‎05-30-2007 03:02 AM

Hi,

Try this:

area x filter-list prefix dummy in

prefix-list dummy permit 1.1.2.0/24

Hope it helps, rate if does

Krisztian

Customers Also Viewed These Support Documents
Review Cisco Networking products for a $25 gift card