T3 Connectivity for Cisco 3825 ISR

Unanswered Question
May 30th, 2007

Hi Sir,


My customer requires T3 connectivity for their Cisco 3825 ISR.


Is NM-1T3/E3 the only option? Its data sheet as follows:


http://www.cisco.com/en/US/products/hw/modules/ps2797/products_data_sheet09186a008010fba2.html


Kindly advise if there's any issue I have to look out for.


Secondly, is CAB-E1-BNC the correct cable for the above NM?



Thank you.


B.Rgds,

Lim TS


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 2 (1 ratings)
Loading.
Paolo Bevilacqua Wed, 05/30/2007 - 06:18

Hello,


Yes the right module is NM-1T3/E3. Cabling is made with coaxial and BNC connectors that I suggest you have made locally.


Hope this helps, please rate post if it does!

khaderbasha Fri, 06/29/2007 - 20:49

Where do I find step-by-step config of NM1-T3/E3 module in low end Cisco routers such as 2600/2651XM. Any link to a short online training or good documentation is appreciated.


Thanks.

Khader

Actions

This Discussion