Want to add VPN traffic to new Outgoing DSL line

Unanswered Question

I have a new ASA 5510 that is currently working fine. I just added a DSL line to be used for incoming VPN connections only.


What do I need to do to get that working? I have turned off all security on the DSL modem and tested it by attaching a laptop to the modem- hard-coding a routable IP (I turned off the modem's DHCP) and was able to ping the laptop w/o an issue. When I plug the modem into the ASA 5510, hard code a routable IP, ping the IP on the ASA I get 'Request timed out.'


What routing do I need to setup on the ASA to get the traffic to pass through?


Thanks,

-Mike Johnson

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
spremkumar Wed, 05/30/2007 - 19:47
User Badges:
  • Red, 2250 points or more

Hi Mike


Can you revert back from where you are trying to ping the ip assigned on the ASA ?


Also did u do a reverse trace for the ip assigned on your ASA ? That will definitely help you out in identifying where its getting blocked..


regds




Actions

This Discussion