I am wondering if there is a bug in the latest cisco firmware for the 871 routers
We noticed a major problem since upgrading from c870-advipservicesk9-mz.124-4.T3, in that it wont allow us to set a qos service policy on our vlan, which was working before.
The error we get when configuring is:
ROUTER(config-if)#service-policy output qos
We still have a router with the old firmware on it and it is fine and works.
Example (Router with old firmware):
ip address 192.168.222.18 255.255.255.248
ip nbar protocol-discovery
ip nat inside
ip ospf message-digest-key 1 md5 xxxx
ip ospf network non-broadcast
ip ospf cost 10
service-policy output qos
where as the new router will throw the error on the last statement.
Anyone have any suggestions?