05-31-2007 12:39 AM - edited 03-03-2019 05:14 PM
Team,
6509-NEB-A Switch ,How many fiber slots comes with this switch and what is the possibity of extending the port?
Solved! Go to Solution.
05-31-2007 01:34 AM
No fiber slots comes by default. Its a 9-slot chassis and you have to add the fiber modules to it depending your requirement. You need atleast single sup engine in the chassis and then modules depending on your requirement.
Please see the link below of wide variety of modules supported on the chassis.
http://www.cisco.com/en/US/products/hw/switches/ps708/products_relevant_interfaces_and_modules.html
HTH,Please rate if it does.
-amit singh
05-31-2007 02:29 AM
by default the switch doesn't come up any modules added on to like supervisor engine, fiber/coper slot,power supply, any the chassis frame come, the above listed all you will need to purchase at extra cost.
05-31-2007 01:34 AM
No fiber slots comes by default. Its a 9-slot chassis and you have to add the fiber modules to it depending your requirement. You need atleast single sup engine in the chassis and then modules depending on your requirement.
Please see the link below of wide variety of modules supported on the chassis.
http://www.cisco.com/en/US/products/hw/switches/ps708/products_relevant_interfaces_and_modules.html
HTH,Please rate if it does.
-amit singh
05-31-2007 02:29 AM
by default the switch doesn't come up any modules added on to like supervisor engine, fiber/coper slot,power supply, any the chassis frame come, the above listed all you will need to purchase at extra cost.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide