05-31-2007 01:16 AM - edited 03-11-2019 03:23 AM
my pix failed and this is what I have
Use BREAK or ESC to interrupt flash boot.
Use SPACE to begin flash boot immediately.
Reading 1962496 bytes of image from flash.
imgsum_config: sumval(0x3e9f) md5(0x96a6bc99 0xfdcbe539 0x38a4f658 0x28d53468)
imgsum_verify: chksum(0x0 ) md5(0x04a70f1b 0x70b19178 0x3fceeab5 0xd0ae764e)
Checksum verification on compression loader failed.
what is this? I tried to raload image but problem is the same
05-31-2007 07:42 AM
Did you try to re-download the image from the Cisco website (or a newer version)? Maybe the image got corrupted...
What version is that?
05-31-2007 07:55 AM
6.3.5. I didn't try to redownload it, hmmmm .... will try
05-31-2007 10:13 PM
I just tried lower version 6.2.2 and problem is the same
06-15-2007 07:16 AM
I have the same problem with 2 pix 515 units. It all started when I tried to upgrade the license to VPN-Triple DES.
I've tried loading 5.2.9, 6.2.4 and 6.3.5 all with the same error: checksum verification of flash image failed
I've tried erasedisk.bin. This erased as expected, but when I load the OS I get the same problem.
Any help would be greatly appreciated...
06-15-2007 07:22 AM
well I've sent my unit to be repaired .... so will see .... and let you know
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide