05-31-2007 01:16 AM - edited 03-11-2019 03:23 AM
my pix failed and this is what I have
Use BREAK or ESC to interrupt flash boot.
Use SPACE to begin flash boot immediately.
Reading 1962496 bytes of image from flash.
imgsum_config: sumval(0x3e9f) md5(0x96a6bc99 0xfdcbe539 0x38a4f658 0x28d53468)
imgsum_verify: chksum(0x0 ) md5(0x04a70f1b 0x70b19178 0x3fceeab5 0xd0ae764e)
Checksum verification on compression loader failed.
what is this? I tried to raload image but problem is the same
05-31-2007 07:42 AM
Did you try to re-download the image from the Cisco website (or a newer version)? Maybe the image got corrupted...
What version is that?
05-31-2007 07:55 AM
6.3.5. I didn't try to redownload it, hmmmm .... will try
05-31-2007 10:13 PM
I just tried lower version 6.2.2 and problem is the same
06-15-2007 07:16 AM
I have the same problem with 2 pix 515 units. It all started when I tried to upgrade the license to VPN-Triple DES.
I've tried loading 5.2.9, 6.2.4 and 6.3.5 all with the same error: checksum verification of flash image failed
I've tried erasedisk.bin. This erased as expected, but when I load the OS I get the same problem.
Any help would be greatly appreciated...
06-15-2007 07:22 AM
well I've sent my unit to be repaired .... so will see .... and let you know
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: