05-31-2007 02:02 AM - edited 03-03-2019 05:14 PM
Please tell me the IOS Which support Multilink(Bundle two lease line of same provifer).
My router is cisco 2501 & Flash is 8 MB.
I tried 11.2-9,11.3-10,12.0-9 but not supported.
Please see the attachment,where i get problem to configure multilink.
05-31-2007 02:07 AM
Hi Arjun
As per the feature navigator 12.(0)1 itself supports Multilink feature.
You can verify the same under this link ...
http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp
regds
05-31-2007 04:29 AM
Hey Arjun,
find the work config, u need not require any IOS upgradation, it works with the virtual-template itself.have the same config on the other end router, but change the ip address, also there is no necessity that you should have the same service provider, you can 2 different service providers.
hostname Router-A
!
aaa new-model
!
username
!
!
!
!
memory-size iomem 25
ip subnet-zero
!
multilink virtual-template 1
!
!
!
interface Virtual-Template1
ip unnumbered FastEthernet0
ppp multilink
!
interface Serial0
bandwidth 2048
no ip address
encapsulation ppp
no fair-queue
pulse-time 3
ppp multilink
!
interface Serial1
bandwidth 2048
no ip address
encapsulation ppp
no fair-queue
pulse-time 3
ppp multilink
!
interface FastEthernet0
ip address 192.168.1.1 255.255.255.0
speed auto
!
!
finally type "show virtual-access 1" which will show the bandwidth of 4Mbps combined together.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide