Vlan Comand query!

kcappell1 · ‎05-31-2007

Hi Guys, Is there a comand (2950 Switches) to assign multple ports to a vlan in one rather then doing each port individually?

Amit Singh · ‎05-31-2007

Yes,

Use " interface range fa 0/x - y" command.There is a space between X, "-" and Y where X and Y denotes the module and interface port number.

Do this :

config t

interface ramge fa 0/1 - 10

switcport access vlan 10

You have to check the IOS that you running, if it supports the " range" command.

HTH,Please rate if it does.

-amit singh