IBGP in Active state

Unanswered Question
May 31st, 2007
User Badges:

Hi all,


I had two routers directly connected via Ethernet


I had configure both as in attached file


I had found that my ibgp neighbour is in active state


any suggestion ?

B#sh ip bgp summary

BGP router identifier 10.10.10.9, local AS number 200

BGP table version is 1, main routing table version 1


Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd

2.2.2.22 4 200 0 2 0 0 0 never Active



A#sh ip bgp summary

BGP router identifier 10.10.10.3, local AS number 200

BGP table version is 1, main routing table version 1


Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd

2.2.2.21 4 200 22 22 0 0 0 never Active






Attachment: 
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
royalblues Thu, 05/31/2007 - 04:00
User Badges:
  • Green, 3000 points or more

I think you didn't have reachability to the loopbacks


Narayan

mahesh-gohil Thu, 05/31/2007 - 04:53
User Badges:

Thanks dear,


issue was to do clear ip bgp


thanks for a link


Regards!!

Actions

This Discussion