we have some Cisco switches in IBM Bladecenters:
CIGESM Software (CIGESM-I6Q4L2-M), Version 12.1(22)EA9.
They are connected to 6513 SUP720.
I'm starting the following monitoring session on 6513:
monitor session 1 source remote vlan 500
monitor session 1 destination interface Gi13/35
and on the blade's switche:
monitor session 1 source gig0/3
monitor session 1 destination remote vlan 500 reflector-port gig0/20
Switch's management VLAN is 352
The trunk config on blade switch looks like:
Port Vlans allowed on trunk
On the system connected to the interface Gi13/35on 6513 I can see the traffic from the bladeswitch's monitored port, but after around 5-10 minutes I can see that the traffic on interfaces Gi0/1-10 and Gi0/14 on the blade switch inreaces dramaticaly (see the picture) from 100 Kbits to 200Mbit and sometimes it leads to the "overutilisation" of interface and connected systems are loosing the network.
What is the problem? Configuration bug or IOS bug. Have anybody met such a problem?