06-01-2007 05:15 AM - edited 03-14-2019 09:50 PM
I would like to setup direct transfer to voice mail in CUE.
I'm already using the E164 for DID assigment so that's not an option. Looks like I will have to go with a translation rule my dial plan is 3 digits begining with 1.. and the E164 number begins with 834221....
Can you help with an example.
thanks
Armando
06-01-2007 05:44 AM
Armando,
Another option is to use the custom script which can be obtained by sending an email to ask-cue-editor@external.cisco.com. See the following link for details on the script and its use.
Hope this helps. If so, please rate the post.
Brandon
06-01-2007 05:48 AM
i figure it out. 8 plus the 3 digit extension.
voice translation-rule 1
rule 1 /^8\(.*\)/ /\1/
voice translation-profile extra_extn
translate redirect-called 1
dial-peer voice 1 voip
translation-profile outgoing extra_extn
preference 1
destination-pattern 6000
session protocol sipv2
session target ipv4:10.66.81.94
incoming called-number .
dtmf-relay sip-notify
codec g711ulaw
no vad
ephone-dn 6 dual-line
number 81..
call-forward all 6000
Armando
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide