06-01-2007 08:27 AM - edited 03-11-2019 03:23 AM
With a PIX 501 running 6.3(4) connecting to the ISP via PPOE with a static IP, What command syntax can I use to create a static NAT translation from that out side IP to a internal IP For the use of incoming Web traffic, email and things like that.
I have done it with a multiple IP but never done it with just the 1 ip on the outside interface.
thanks!
Brandon
06-01-2007 10:42 AM
Configure static port redirection using the interface statement
static [(internal_if_name, external_if_name)] {tcp|udp} {global_ip|interface} global_port
local_ip local_port [netmask mask]
ex:
static (inside, outside) tcp interface 80 192.168.1.10 255.255.255.255 80
Thanks,
Chad
Please rate if helpful.
06-01-2007 10:46 AM
Chad, just a little typo :)
static (inside, outside) tcp interface 80 192.168.1.10 80 netmask 255.255.255.255
06-01-2007 04:35 PM
ok thanks guys will try this over the weekend
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: