06-03-2007 03:49 AM - edited 03-05-2019 04:27 PM
Hi Guys,
I'm currently designing a network for a serviced/managed office environment. About 30 clients with about 1-5users per client. I would like to build into my design a dynamic VLAN feature. Where the users can plug in anywhere on the lan and get assigned the same VLAN.
I will be using C3750s and a C2811.
I know about VMPS, openVMPS and FreeNac, but my god are the later 2 difficult to get going install and manage. VMPS i believe is legacy and not available on the switchs i#m installing. I would like the receptionist to take the users MAC address, put this into a database with their VLAN adn away we go.
If anyone has been in a similar scenario or have any ideas i would like to know. No matter how trivial.
Regards
Stephen
06-03-2007 07:57 AM
I have tried 802.1x authentication with VLAN assignment in a lab scenario quite a while back with the 2950 switches. You might want to look it up if it will suit your needs. Requires a RADIUS server tho.
06-03-2007 07:57 AM
Hello,
Spoofed MAC addresses will place users into inappropriate VLANs.
Might I suggest dynamic VLAN assignment based on RADIUS credentials? Brief googling on this setup has turned up several FreeRADIUS scenarios.
Good luck,
Curtis H.
06-03-2007 12:36 PM
Hi Guys,
Thanks for the replies. I will investigate the RADIUS server answer tomorrow. I think this maybe the easist way to do this.
I also like the idea of users authenticating on the network.
If anyone has any other tips for me on this, please let me know.
Regards
Stephen
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: