Routing issue when using Remote access

Unanswered Question
Jun 3rd, 2007

Hi All,

I have the following setup:

layer 3 Switch --192.168.1.x/24-- ASA5520 --192.168.7.x/24-- Internet Router ----- VSAT

I have configured the Internet Router to do PATing for the DATA VLAN on the L3 Switch. I have also configure the Internet Router to redirect any request for UDP 500 to the Outside Interface of ASA5520

I am able to establish a VPN tunnel which successfully terminates on the Outside interface of the ASA5520, however i am having a problem pinging the internal vlans (such as the DATA VLAN).

I have set the ASA5520 with the "tunneled default route".

Any ideas to trouble this problem??

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
mahzoddc06 Sun, 06/03/2007 - 08:28

I didn't include the IPsec NAT-Traversal on the ASA5520...its working fine now

Actions

This Discussion