cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
285
Views
5
Helpful
1
Replies

Routing issue when using Remote access

mahzoddc06
Level 1
Level 1

Hi All,

I have the following setup:

layer 3 Switch --192.168.1.x/24-- ASA5520 --192.168.7.x/24-- Internet Router ----- VSAT

I have configured the Internet Router to do PATing for the DATA VLAN on the L3 Switch. I have also configure the Internet Router to redirect any request for UDP 500 to the Outside Interface of ASA5520

I am able to establish a VPN tunnel which successfully terminates on the Outside interface of the ASA5520, however i am having a problem pinging the internal vlans (such as the DATA VLAN).

I have set the ASA5520 with the "tunneled default route".

Any ideas to trouble this problem??

1 Reply 1

mahzoddc06
Level 1
Level 1

I didn't include the IPsec NAT-Traversal on the ASA5520...its working fine now

Review Cisco Networking products for a $25 gift card