standard troubleshooting documentation for ccm 4.1(3) & unity 4.0(4)

Unanswered Question
Jun 3rd, 2007
User Badges:

dear sir,

Anyone have any standard troubleshooting procedure/documentation for cisco call manager 4.1(3)sr2 & unity 4.0(4) ?


Please share, your effort shall be highly appreciated.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Rob Huffman Mon, 06/04/2007 - 04:47
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Charles,


Here are the related docs;


Troubleshooting Guide for Cisco CallManager, Release 4.1(3)


http://www.cisco.com/en/US/products/sw/voicesw/ps556/prod_troubleshooting_guide_book09186a00803c8cbb.html


Cisco Unity Troubleshooting Guide (With Microsoft Exchange), Release 4.0(4)


http://www.cisco.com/en/US/docs/voice_ip_comm/unity/404/troubleshooting/guide/ex/ex.html


Cisco Unity Troubleshooting TechNotes


http://www.cisco.com/en/US/products/sw/voicesw/ps2237/prod_tech_notes_list.html


Hope this helps!

Rob

espereir Thu, 06/07/2007 - 22:23
User Badges:
  • Silver, 250 points or more

Hello,


If you are having some problems between Unity and CCM, the best way to check the call is with the Port Status Monitor and the Call Viewer, both tools are located at the Cisco Unity Tools Depot located at your desktop, and you will see the port ID, the called, calling and forwarding number on the Call Viewer, and then you check that port on the Port Status Monitor and that way you can troubleshoot high complex Call flows with handlers and subscribers on the Unity System.

Actions

This Discussion