Non Bridge Interface will not work

Unanswered Question
Jun 3rd, 2007

Alright So, I am using a Cisco 871W router and currently have this config:

!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!

version 12.3

no service pad

service timestamps debug datetime msec

service timestamps log datetime msec

no service password-encryption

!

hostname Router

!

boot-start-marker

boot-end-marker

!

!

no aaa new-model

ip subnet-zero

ip cef

!

!

ip dhcp excluded-address 10.11.11.1 10.11.11.2

ip dhcp excluded-address 10.11.12.1 10.11.12.2

!

ip dhcp pool Vlan1Pool

import all

network 10.11.11.0 255.255.255.0

dns-server 192.168.0.1

default-router 10.11.11.1

domain-name LocalWired

lease 4

!

ip dhcp pool Vlan2Pool

import all

network 10.11.12.0 255.255.255.0

default-router 10.11.12.1

dns-server 192.168.0.1

domain-name LocalWireless

lease 4

!

!

ip ips po max-events 100

no ftp-server write-enable

!

!

!

!

!

!

!

interface FastEthernet0

no ip address

!

interface FastEthernet1

no ip address

shutdown

!

interface FastEthernet2

no ip address

shutdown

!

interface FastEthernet3

no ip address

shutdown

!

interface FastEthernet4

ip address dhcp

ip nat outside

ip virtual-reassembly

duplex auto

speed auto

!

interface Dot11Radio0

no ip address

!

encryption vlan 2 mode ciphers tkip

!

ssid WLan2

vlan 2

authentication open

authentication key-management wpa

guest-mode

wpa-psk ascii 0 passforcisco

!

speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0

station-role root

!

interface Dot11Radio0.2

encapsulation dot1Q 2

!

interface Vlan1

description "VLan for Wired Ports"

ip address 10.11.11.1 255.255.255.0

ip nat inside

ip virtual-reassembly

!

interface Vlan2

description "Wireless LAN"

ip address 10.11.12.1 255.255.255.0

ip nat inside

ip virtual-reassembly

!

ip classless

!

!

no ip http server

no ip http secure-server

!

!

!

control-plane

!

!

line con 0

no modem enable

transport preferred all

transport output all

line aux 0

line vty 0 4

!

scheduler max-task-time 5000

end

!!!!!!!!!!!!!!!!!!!!!!!!!!!!

So the DHCP works just fine for the Fast Ethernet Interfaces but the Radio interface doesn't seem to work. I want to have 2 Vlans, 1 for the wireless and 1 for the wired as well as having them both on different subnets (doesn't matter the value) can anyone point me in the direction I need to go? I'd like to not have to bridge anything for that seems easier. Thanks

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
bwalchez Fri, 06/08/2007 - 07:11

Your configuration seems to be correct for me. But is the client associating without IP address. I mean client will associate with least connectivity. Also, I am not sure about "ip nat inside" command. I think this configuration might be a problem for wireless network.

Actions

This Discussion