I am using a cisco AS5300, and we have experiencing a problem sending the ANI. I want it to be a wildcard and on my dial-peer i didn't specify a clid. As far as i am concern the cisco is sending an ANI by default. But there are times that it didn't pass any ANI at all. Does clid network-number command useful? using wildcard.
dial-peer voice 316 voip
description DID Block 01312022xxx
huntstop
destination-pattern 01312022...
progress_ind setup enable 3
session protocol sipv2
session target ipv4:192.168.111.22
dtmf-relay rtp-nte
codec g711ulaw