IP phones are frequently hanging

Unanswered Question
Jun 4th, 2007

We deployed Cisco Airspace solution in our network one 7920 Wireless IP Phone is getting frequently hanging and phone power is getting down. It's happen even phone battery is full charge condition.

Other phones are working fine. Phone Hardware version is 1.9 and Firmware version is 7920-4.0-02-01.

Please sugess me anyone facing same type of problem.

Thanking you,


Ranga Kishore

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
migilles Tue, 06/05/2007 - 00:15

If running 4.0 version on the controller, then some issues with 7920 handling the neighbor list when 802.11a interfaces are enabled. 4.0 implemented CCX features including neighbor list functionality.

Also some issues with MBSSID if there are many beacons present on a single channel. Will need to upgrade to 3.01 or later, but recommend 3.02 which was just released recenlty.

See the 3.01 release notes, where these issues were addressed (CSCsf06405 & CSCsf04685).


Download 3.02 @ http://www.cisco.com/cgi-bin/tablebuild.pl/ip-7900ser-crypto.

Also recommend on the controller, otherwise will need to set the Platinum qos profile's 802.1p tag to 7 vs 6 due to aging feature in the 4.0 controller release for non-WMM clients.


This Discussion