06-05-2007 02:49 AM - edited 03-14-2019 09:53 PM
CCM 4.1(3)sr3a with BAT 5.1(4a). Is this system support BAT for VG224?
Solved! Go to Solution.
06-05-2007 05:47 AM
Hi Cheh,
Sorry to say BAT does not support the VG224 :(
CSCeg88823
Symptom:
BAT does not support adding VG224 ports in bulk
Conditions:
This is for all version of BAT and all current version of Callmanager 3.x, 4.x, 5.x
Hope this helps!
Rob
06-05-2007 05:47 AM
Hi Cheh,
Sorry to say BAT does not support the VG224 :(
CSCeg88823
Symptom:
BAT does not support adding VG224 ports in bulk
Conditions:
This is for all version of BAT and all current version of Callmanager 3.x, 4.x, 5.x
Hope this helps!
Rob
06-14-2007 10:27 AM
Just as an aside, Cisco did finally add the VG224 to BAT under CallManager 6. See the below for details:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/bat/6_0_1/t08gwins.html#wp1345635
Better late than never...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: