7906G DOES'NT START

Unanswered Question
Jun 5th, 2007

I have CCME 4.1 with 7906G Phones (over WAN)

7906G firmware is jar11sccp.8-0-2-25.sbn

After power loss 7906 does'nt start

saying;

"downloading term06.default"

I cannot access the telephone anymore.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4 (1 ratings)
Loading.
Tommer Catlin Tue, 06/05/2007 - 08:38

Factory reset the phone and see if it fixes it. Possibly the firmware is corrupted and needs a reload. This will do it


You do this by holding down the # key while the phone is powering up. The screen will prompt you with a message that the reset sequence has started. At that point you hit the following key sequence 123456789*0# The phone will then prompt if you want the network configuration saved choose no.


That will allow your system to recognize the phone from scratch.




Actions

This Discussion