Saving Clock Settings on a Catalyst 3560

Unanswered Question
Richard Burts Tue, 06/05/2007 - 18:58
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

Peter


I do not have specific experience on the 3560 but I know that many of the lower end product line of Catalyst switches and IOS routers do not have a built in clock chip that remembers time over a reboot. The time reverting to Mar 1 1993 is typical of these devices. There is no command that will change this behavior.


The best solution to this is to have some router in the network that learns time from an authoritative source or that has the built in clock chip and for that device to be configured as an NTP server for the 3560 and similar devices.


HTH


Rick

anandramapathy Tue, 06/05/2007 - 20:00
User Badges:
  • Bronze, 100 points or more

Try setting it to a public NTP server


ntp server 129.7.1.66

ntp server 139.78.100.163


Actions

This Discussion