06-06-2007 08:07 AM - edited 03-14-2019 09:55 PM
I have a port channel configured and two Sup32 SFP gig ports in the channel. This etherchannel is the uplink from this 6509 to another 6509 and I need to apply the appropriate wrr-queue qos statements.
Do these statements go on each individual SFP gig interface, or just on the port channel interface?
Here are the appropriate interface configs:
interface Port-channel1
ip address 164.7x.xx.xx 255.255.255.252
ip pim sparse-mode
interface GigabitEthernet5/1
no ip address
channel-group 1 mode desirable
!
interface GigabitEthernet5/2
no ip address
channel-group 1 mode desirable
I think the queue commands go on the hardware interfaces but I just want to make sure.
Solved! Go to Solution.
06-06-2007 08:18 AM
You can put that on the hardware interfaces.
06-06-2007 08:18 AM
You can put that on the hardware interfaces.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: