Jon Marshall Wed, 06/06/2007 - 08:44
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

Hi


Chances are you will be running a 6.x version of the software as pix 501 does not support version 7.x


Attached is a link to the pix config guide for 6.3 which should get you started.


There is a graphical interface for the pix called PDM - how to set this up will be covered in config guide.


http://www.cisco.com/en/US/docs/security/pix/pix63/configuration/guide/config.html


HTH


Jon

Actions

This Discussion