06-06-2007 04:27 PM - edited 03-03-2019 05:20 PM
I need to get a way to get the firmware information of an AUSM card with the card?s serial number. The problem is that the MGX 8850 doesn?t recognize the card, so i need to find this information in another way!!
06-12-2007 10:28 AM
Use the dspcd command to view hardware and firmware information about the selected PXM.
http://www.cisco.com/univercd/cc/td/doc/product/wanbu/bpx8600/pnni_ses/rel1_0/softw/orcgapb2.pdf
09-03-2007 07:27 PM
Hi Ronald -
the AUSM is passive in that the firmware is automatically downloaded from the PXM card.
Just issue the "dspfwrevs" command on the active PXM and it will show you which firmware versions are installed in the "C:FW" directory.
rgds
Joern Pasche
SwitchXchange, Inc.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide