06-07-2007 05:31 AM - edited 03-05-2019 04:33 PM
Have an ATA flash card that can not be formatted or read in slot0 of the 6509 sup2-2ge engine. Is there another card recommended for this?
Solved! Go to Solution.
06-07-2007 05:40 AM
Hi Friend,
From release notes
With software releases 7.5(1) and later, additional Flash PC card support was added as follows:
?64-MB ATA Flash PC card (MEM-C6K-ATA-1-64M=)?Only supported on Supervisor Engine 2. The device name is disk0: and the card requires ROMMON version 7.1(1) and later releases.
?64-MB linear Flash PC card (MEM-C6K-FLC64M=)?Only supported on Supervisor Engine 1. The device name is slot0: and the card requires ROMMON software release 5.3(1) and later releases.
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/relnotes/ol_4498.htm#wp410962
HTH
Ankur
*Pls rate all helpfull post
06-07-2007 05:39 AM
You can use ATA flash card in Sup2 engine but make sure the ROMMON version is at 7.1(1)
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/cfgnotes/6507_01.htm
06-07-2007 06:10 AM
The ROMMON version is 7.1(1).
06-07-2007 05:40 AM
Hi Friend,
From release notes
With software releases 7.5(1) and later, additional Flash PC card support was added as follows:
?64-MB ATA Flash PC card (MEM-C6K-ATA-1-64M=)?Only supported on Supervisor Engine 2. The device name is disk0: and the card requires ROMMON version 7.1(1) and later releases.
?64-MB linear Flash PC card (MEM-C6K-FLC64M=)?Only supported on Supervisor Engine 1. The device name is slot0: and the card requires ROMMON software release 5.3(1) and later releases.
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/relnotes/ol_4498.htm#wp410962
HTH
Ankur
*Pls rate all helpfull post
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide