1200 series AP and EAP failure

Unanswered Question
Jun 7th, 2007
User Badges:

Heres my problem, remote site standalone AP, users failing authentication. Radius key is configured correctly. Radius server log shows the EAP information blank for the authentication requests.


The AP configuration has been checked and double checked.


I suspect their may actually be something wrong with the AP itself.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Jagdeep Gambhir Fri, 06/08/2007 - 05:05
User Badges:
  • Red, 2250 points or more

Hi Scott,

Please try test authentication from AP and see if that works,


telnet to AP and issue command,

ap#test aaa group radius username password legacy


Username = The one configured in Radius


If that works then get debugs,


debug aaa authentication

debug radius

ter mon


Thanks,

Jaddeep

fazmibakar Sun, 07/15/2007 - 23:46
User Badges:

my AP also...face the same problem...is it the 'password legacy' is default password?or it same with the password which is configured in ACS?

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode