06-07-2007 06:52 PM - edited 07-03-2021 02:11 PM
Heres my problem, remote site standalone AP, users failing authentication. Radius key is configured correctly. Radius server log shows the EAP information blank for the authentication requests.
The AP configuration has been checked and double checked.
I suspect their may actually be something wrong with the AP itself.
06-08-2007 05:05 AM
Hi Scott,
Please try test authentication from AP and see if that works,
telnet to AP and issue command,
ap#test aaa group radius username password legacy
Username = The one configured in Radius
If that works then get debugs,
debug aaa authentication
debug radius
ter mon
Thanks,
Jaddeep
07-15-2007 11:46 PM
my AP also...face the same problem...is it the 'password legacy' is default password?or it same with the password which is configured in ACS?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide