Intel(R)Pro/Wireless 2200BG Problem with Cisco Wireless AP 1200

Unanswered Question
Jun 7th, 2007
User Badges:

Hi NetPro,


does anyone who has encountered the problem associate with Cisco AP ? the laptop model is IBM T42, T42, T60 (Intel(R)Pro/Wireless 2200BG driver version 9.0.4.14). any idea and advice ?


thank you in advance.


regards,

Jack

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
scottmac Fri, 06/08/2007 - 09:01
User Badges:
  • Green, 3000 points or more

Update your Intel drivers (11.{something} is current).


The old Intel drivers (especially with old Cisco AP code) are really bad. Update when you can, try it out.


Good Luck


Scott



john.preves Tue, 06/12/2007 - 22:27
User Badges:
  • Silver, 250 points or more

I actually have a laptop that sits in a desk drawer because I couldn't get it to work using PEAP. I have another one with a broadcom card works just fine.

andrew.brazier@... Mon, 07/23/2007 - 03:23
User Badges:
  • Bronze, 100 points or more

You might also try this hotfix from MS:


http://support.microsoft.com/kb/885453


It's an "upon request" fix but it should be a free call. We had similar problems with the IBM's you mentioned which were resolved by updating the drivers then applying the hotfix.

George Stefanick Thu, 11/15/2007 - 21:14
User Badges:
  • Purple, 4500 points or more
  • Community Spotlight Award,

    Best Publication, October 2015

The Intel 2200's are a known problem. as stated by the other poster update the firmware... older verison of the 2200 wont allow your client to step down to lower data rates.... google it ...

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode