HREAP and roundtrip-latency

Unanswered Question
Jun 8th, 2007
User Badges:

Hello,

we are interested in using a centralized wlan management for our country location and read from the limitation of 100 ms roundtrip between the hreap and the controller. Are there any experiences concerning this problem? How does it effect the wlan and is there- except qos a workaround?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
bwilmoth Fri, 06/15/2007 - 10:21
User Badges:
  • Silver, 250 points or more

You could try to increase the bandwidth of the WAN link.Also check of rMTU limitations on firewall if you have one.

We are using HREAP in several offices in our enterprise. Currently, each office has a minimum bandwidth of two DS1 circuits. We are not currently experiencing any latency issues in the four HREAP offices. Each office has a minimum count of two LWAPP access points. One office has 3 APs , soon to be 7 APs.


We too are interested in centralizing our WLAN enterprise. We would be very appreciative to find out if any other network admins are attempting to do, or have already done this.

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode