Trunk 7936

Answered Question

Is there any reason why you would want to trunk a 7936? If on the switch side, you are using the access vlan and voice vlan. Does trunking cause any issues?

Correct Answer by Rob Huffman about 9 years 11 months ago

Hi Sar,


Paolo is correct here (as usual Paolo)! I have found that the 7935 and 7936 will not fire up if you configure the switchport in Trunk mode :(


Hope this helps!

Rob

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
paolo bevilacqua Fri, 06/08/2007 - 15:23
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Hello,


I do not see any reason to trunk a 7936, or any other model. As you indicated, the access+voice vlan is the proper way to configure the switch port.


Hope this helps, please rate post if it does!

Correct Answer
Rob Huffman Fri, 06/08/2007 - 17:31
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Sar,


Paolo is correct here (as usual Paolo)! I have found that the 7935 and 7936 will not fire up if you configure the switchport in Trunk mode :(


Hope this helps!

Rob

Actions

This Discussion