06-08-2007 03:18 PM - edited 03-14-2019 09:58 PM
Is there any reason why you would want to trunk a 7936? If on the switch side, you are using the access vlan and voice vlan. Does trunking cause any issues?
Solved! Go to Solution.
06-08-2007 05:31 PM
Hi Sar,
Paolo is correct here (as usual Paolo)! I have found that the 7935 and 7936 will not fire up if you configure the switchport in Trunk mode :(
Hope this helps!
Rob
06-08-2007 03:23 PM
Hello,
I do not see any reason to trunk a 7936, or any other model. As you indicated, the access+voice vlan is the proper way to configure the switch port.
Hope this helps, please rate post if it does!
06-08-2007 05:31 PM
Hi Sar,
Paolo is correct here (as usual Paolo)! I have found that the 7935 and 7936 will not fire up if you configure the switchport in Trunk mode :(
Hope this helps!
Rob
06-11-2007 08:34 AM
Thanks for your help!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: