traceroute - 2 similiar hop ..

Unanswered Question
Jun 11th, 2007
User Badges:

hi experts..


does anyone know why traceroute trough MPLS resulting 2 similiar hop as below.


hop1 = home ce

hop2 = home pe

hop3 = remote ce

hop4 = remote ce (this is twice)

hop5 = remote host


furthermore, i can't see remote default gateway for net 10.193.28 /28 which is 10.193.8.46



[email protected] # traceroute 10.193.8.33

traceroute to 10.193.8.33 (10.193.8.33), 30 hops max, 40 byte packets

1 10.196.197.6 (10.196.197.6) 1.008 ms 0.809 ms 0.764 ms

2 10.172.34.9 (10.172.34.9) 3.778 ms 3.716 ms 3.737 ms

3 10.167.1.60 (10.167.1.60) 7.640 ms 7.485 ms 7.508 ms

4 10.167.1.60 (10.167.1.60) 7.554 ms 7.520 ms 7.492 ms

5 10.193.8.33 (10.193.8.33) 7.856 ms 7.508 ms 7.344 ms



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 2.5 (2 ratings)
Loading.
ariela Mon, 06/11/2007 - 08:16
User Badges:
  • Silver, 250 points or more

Hi,


IOS release? platform?


Regards

Andrea

ariela Tue, 06/12/2007 - 00:21
User Badges:
  • Silver, 250 points or more

Please past a 'show ver'


Thanks

Andrea

silverservercl8 Thu, 07/05/2007 - 14:05
User Badges:

Hi!


We also see that behavior with sup720-3bxl. Whenever such a switch does PHP it also decreases the ttl of the resulting packet (what it shouldn't). If this is an IP-Packet the switch sends a packet with ip ttl=0(!).


Is there any workaround? Besides replacing the sup720? This seems to me like a show-stopper for the sup720 in an MPLS enviroment. Any HW upgrades that solve this issue planned?


Christoph


soin-kamal Wed, 06/13/2007 - 05:18
User Badges:

This is a last device whee the label is taken out and packet is delivered to the rempte host ,without loosing its integrety...

Here if you see the show label command you will find that on this interface( outgoing interface ) it has two hops.



Actions

This Discussion