cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
4106
Views
5
Helpful
4
Replies

ASA SSH2 Server failed

mbutorac1
Level 1
Level 1

Howdy,

For some reason, I now get password authentication failure with the ssh2 server. Username & pasword allow me in with ASDM. SSH used to work last week.

6 Jun 11 2007 10:58:41 315011 172.20.199.199 SSH session from [snip] disconnected by SSH server, reason: "Internal error" (0x00)

Any ideas?

Mike

4 Replies 4

ggilbert
Cisco Employee
Cisco Employee

Mike,

Just do the following.

conf t

crypto key zero rsa

crypto key generate rsa modulus 1024

And make sure you have ssh access enabled

sh run | in ssh --> this command will give you the output of the IP address and the interface for which SSH is enabled. Make sure that the IP address you are trying to ssh from, is on this list.

Let me know.

Cheers,

Gilbert

Hi and thanks Gilbert.

Turns out a "cow-orker" disabled aaa/ssh as a gag. Should have clued in quicker I guess. Oh well!

Cheers,

M.

I have the same issue, reseting the key does not solve the problem, I can resolve this, by setting the ssh version to 1.

ssh version 1


Guido.

Please rate all the helpful comments.

spirtovoz
Level 1
Level 1

in other case in can be authentication issue indeed. it is necessary to check authentication method for ssh access also.

Review Cisco Networking products for a $25 gift card