Buy or Renew
Buy or Renew
Cisco + Splunk: It’s a new day for your data. Learn more.
 
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
663
Views
0
Helpful
4
Replies

ATA186

valides007
Level 1
Level 1

‎06-11-2007 10:40 AM - edited ‎03-14-2019 09:59 PM

the ata is connected to a CME. the analog phone connected to this ata does recieve calls, but it can't make calls (no dial tones..).

Do i need to work on the ATA configuration or the CME? and how?

Labels:
0 Helpful
4 Replies 4

Alf Martinsen
Level 1
Level 1

‎06-12-2007 12:41 AM

Hi

You have to register the ATA (if it's not auto reg)then assign it, css, part, dir number

/ama

0 Helpful

paolo bevilacqua
Hall of Fame
Hall of Fame

‎06-12-2007 03:12 AM

Which image are you using on the ATA ?

0 Helpful

valides007
Level 1
Level 1
In response to paolo bevilacqua

‎06-12-2007 04:30 AM

what do u mean by image?

Let's tell u what i did:

I did all the configuration needed for an ATA in the IP-PBX (Cisco 2821).

It seems that the ATA and the CME are talking. When i make a call from any IP phone to the ATA, it works-you hear the analog phone ringing, but i'm not able to make a call from the analog phone that is connected to the ATA.. Any help?

0 Helpful

Rick Thomas
Level 1
Level 1
In response to valides007

‎03-21-2010 11:05 AM

Is your Cisco ATA 186

running SIP or SCCP firmware?

0 Helpful
Customers Also Viewed These Support Documents