IOS command on CatOS

Unanswered Question
Jun 11th, 2007
User Badges:

Hello All,

I want to carry out an IOS command on CatOS.



service timestamps debug datetime localtime

service timestamps log datetime localtime

logging buffered 8192 informational

logging trap debugging

logging facility local1

logging X.X.X.X


aaa authentication login default group tacacs+ line

aaa authentication enable default group tacacs+ enable

aaa authorization exec default group tacacs+ none

aaa authorization commands 1 default group tacacs+ none

aaa authorization commands 15 default group tacacs+ none

aaa accounting exec default start-stop group tacacs+

aaa accounting commands 1 default start-stop group tacacs+

aaa session-id common

tacacs-server host X.X.X.X

tacacs-server directed-request

tacacs-server key xxx


snmp-server community imsp-isd-com RO


no ip domain-lookup


ntp server X.X.X.X

ntp server X.X.X.X



Is there a corresponding command?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Jagdeep Gambhir Tue, 06/12/2007 - 01:00
User Badges:
  • Red, 2250 points or more

Console> (enable) set tacacs server [IP] [primary]

set tacacs key [key]

set tacacs attempts [number] (optional)

set localuser user [user] password [password] privilege 15

set authentication login local enable

set authentication login tacacs enable [all | console | http | telnet] [primary]

set authorization exec enable tacacs+ [deny | none] [console | telnet | both]

set authorization commands enable [config | all] tacacs+ [deny | none] [console |

telnet | both]

Console> (enable) set accounting exec enable stop-only tacacs+

Console> (enable) set accounting commands enable config stop-only tacacs+

Check this link for more information.



Note: If that answers your question, then please mark this thread as resolved, so that others can benefit from it.


This Discussion