IOS command on CatOS

yasuki.nakabayashi · ‎06-11-2007

Hello All,

I want to carry out an IOS command on CatOS.

IOS----------------------------------------------------

!

service timestamps debug datetime localtime

service timestamps log datetime localtime

logging buffered 8192 informational

logging trap debugging

logging facility local1

logging X.X.X.X

!

aaa authentication login default group tacacs+ line

aaa authentication enable default group tacacs+ enable

aaa authorization exec default group tacacs+ none

aaa authorization commands 1 default group tacacs+ none

aaa authorization commands 15 default group tacacs+ none

aaa accounting exec default start-stop group tacacs+

aaa accounting commands 1 default start-stop group tacacs+

aaa session-id common

tacacs-server host X.X.X.X

tacacs-server directed-request

tacacs-server key xxx

!

snmp-server community imsp-isd-com RO

!

no ip domain-lookup

!

ntp server X.X.X.X

!

----------------------------------------------------------

Is there a corresponding command?

Jagdeep Gambhir · ‎06-12-2007

Console> (enable) set tacacs server [IP] [primary]

set tacacs key [key]

set tacacs attempts [number] (optional)

set localuser user [user] password [password] privilege 15

set authentication login local enable

set authentication login tacacs enable [all | console | http | telnet] [primary]

set authorization exec enable tacacs+ [deny | none] [console | telnet | both]

set authorization commands enable [config | all] tacacs+ [deny | none] [console |

telnet | both]

Console> (enable) set accounting exec enable stop-only tacacs+

Console> (enable) set accounting commands enable config stop-only tacacs+

Check this link for more information.

Regards,

Jagdeep

Note: If that answers your question, then please mark this thread as resolved, so that others can benefit from it.

yasuki.nakabayashi · ‎06-13-2007

Thanks for the answer!